[ntp:questions] prblm to sync time with modem

mayer at gis.net mayer at gis.net
Wed Feb 23 18:04:12 UTC 2005


----- Original Message Follows -----
> Hi list,
> 
> Hope someone can help me with this plbm.
> I'm trying to sync time with modem to a timeserver in Sweden.
> But it fails..
> I'm using version 4.2.0 compiled on Debian Sarge.
> 
> My /etc/ntp.conf
> 
> server 127.127.18.1 prefer
> phone ATDT033415783
> 
> output from # ntpd -d
> ntpd 4.2.0 at 1.1161-r Wed Feb 23 11:31:12 CET 2005 (2)
> addto_syslog: ntpd 4.2.0 at 1.1161-r Wed Feb 23 11:31:12 CET 2005 (2)
> addto_syslog: signal_no_reset: signal 13 had flags 4000000
> addto_syslog: precision = 3.000 usec
> create_sockets(123)
> addto_syslog: no IPv6 interfaces found
> addto_syslog: bind() fd 4, family 2, port 123, addr 0.0.0.0,
> in_classd=0 flags=8 fails: Address already in use addto_syslog: bind()
> fd 4, family 2, port 123, addr 127.0.0.1, in_classd=0 flags=0 fails:
> Address already in use addto_syslog: bind() fd 4, family 2, port 123,
> addr 192.168.0.193, in_classd=0 flags=8 fails: Address already in use

You are running another instance of ntpd. You need to shut one of them
down.

> init_io: maxactivefd 0 local_clock: at 0 state 0
> peer_clear: at 0 assoc ID 44100 refid INIT
> refclock_open: fd 5 modem status 0x4126
> refclock_ioctl: fd 5 flags 0x4
> acts: state 0 send 20 ATB1&C1&D2E0L1M1Q0V1
> newpeer: 127.0.0.1->127.127.23.1 mode 3 vers 4 poll 10 18 flags 0x21
> 0x1 ttl 0 key 00000000 report_event: system event 'event_restart'
> (0x01) status 'sync_alarm, sync_unspec, 1 event, event_unspec'
> (0xc010) acts: state 0 timecode 2 OK
> auth_agekeys: at 1 keys 1 expired 0
> refclock_transmit: at 2 127.127.23.1
> acts: state 0 send 13 ATDT033415783
> acts: state 1 timecode 14 PROTOCOL: NONE
> acts: state 1 timecode 12 CONNECT 1200
> acts: state 2 timecode 78 2005-02-23 13:21:30 VIN
> 230805403270220050223122153424-50000502              * acts: state 3
> timecode 78 2005-02-23 13:21:31 VIN
> 230805403270220050223122153424-50000503              * acts: state 3
> timecode 78 2005-02-23 13:21:32 VIN
> 230805403270220050223122153424-50000500              * acts: state 3
> timecode 27 2005-02-23 13:2x$H        * acts: state 3 timecode 78
> 2005-02-23 13:21:35 VIN 230805403270220050223122153424-50000503       
>       * acts: state 3 timecode 78 2005-02-23 13:21:36 VIN
> 230805403270220050223122153424-50000500              * acts: state 3
> timecode 78 2005-02-23 13:21:37 VIN
> 230805403270220050223122153424-50000501              * acts: state 3
> timecode 78 2005-02-23 13:21:38 VIN
> 230805403270220050223122153424-50000502              * acts: state 3
> timecode 78 2005-02-23 13:21:39 VIN
> 230805403270220050223122153424-50000503              * acts: state 3
> timecode 78 2005-02-23 13:21:40 VIN
> 230805403270220050223122153424-50000500              * acts: state 3
> timecode 78 2005-02-23 13:21:41 VIN
> 230805403270220050223122153424-50000501              *
> refclock_receive: at 29 127.127.23.1 peer ACTS_PTB(1) event
> 'event_reach' (0x84) status 'unreach, conf, 1 event, event_reach'
> (0x8014) refclock_sample: n 10 offset 62.502742 disp 0.000000 jitter
> 1.129995 clock_filter: n 1 off 62.502742 del 0.000000 dsp 8.576435 jit
> 0.000004, age 29 addto_syslog: too many recvbufs allocated (40)
> addto_syslog: too many recvbufs allocated (40)
> addto_syslog: too many recvbufs allocated (40)
> 
There was a problem with the input_handler() not releasing unused
recvbuffs. It's fixed but not yet available due to other issues.

Danny

> 
> Mvh / Regards
> Fredrik Johansson
> _______________________________________________
> questions mailing list
> questions at lists.ntp.isc.org
> https://lists.ntp.isc.org/mailman/listinfo/questions



More information about the questions mailing list