[ntp:questions] NTP on local network
venu gopal
neo.venu at gmail.com
Tue Feb 12 11:45:24 UTC 2008
Hi,
As per the ntpq output given, the initial offset is too high (in bold
below).
ntpq> rv 12516
status=9014 reach, conf, 1 event, event_reach,
srcadr=MAIL, srcport=123, dstadr=192.168.4.18, dstport=123, leap=00,
stratum=2, precision=-6, rootdelay=31.250, rootdispersion=10932.175,
refid=DC1, reach=377, unreach=0, hmode=3, pmode=4, hpoll=6, ppoll=6,
flash=00 ok, keyid=0, ttl=0, *offset=3604309.724*, delay=0.240,
dispersion=20.390, jitter=11.206,
reftime=cb5bd42e.a7f3e6ed Tue, Feb 12 2008 11:45:42.656,
org=cb5bd4bb.8004493a Tue, Feb 12 2008 11:48:03.500,
rec=cb5bc6a7.2da250f8 Tue, Feb 12 2008 10:47:59.178,
xmt=cb5bc6a7.2d8f605a Tue, Feb 12 2008 10:47:59.177,
filtdelay= 0.29 0.32 0.28 0.33 0.29 0.29 0.34
0.24,
filtoffset= 3604321 3604321 3604312 3604321 3604321 3604321 3604321
3604309,
filtdisp= 15.63 16.60 17.59 18.58 19.57 20.53 21.49
22.45
Before starting 'ntpd' use 'ntpdate' at the clients to nullify this initial
high
offset.
Then I hope it should work.
Venu
More information about the questions
mailing list