[ntp:questions] ldattach makes ttySx buffered !?
Richard B. Gilbert
rgilbert88 at comcast.net
Sun May 2 19:37:38 UTC 2010
unruh wrote:
> On 2010-05-02, Richard B. Gilbert <rgilbert88 at comcast.net> wrote:
>> Wolfgang Breyha wrote:
>>> Hi!
>>>
>>> I'm running a soekris net4801 with openwrt 10.03. kernel 2.6.32.10 with
>>> LinuxPPS patch and ntpd 4.2.6p1.
>>>
>>> Today I recognized that my /dev/ttyS1 gets a input buffer as soon as I run
>>> ldattach PPS /dev/ttyS1
>>>
>>> The buffer is hold until somebody connects to /dev/ttyS1 and reads it. This
>>> is reproduceable with "cat" at any time.
>>>
>>> ntpd gets confused by the input at start big time and needs really long to
>>> settle.
>>>
>>> I have not found the cause of this yet. Has somebody noticed similar behaviour?
>>>
>>> Greetings, Wolfgang
>> NTPD has always needed a long time to settle. From a cold start you
>> need to wait ten to twelve hours for the time to reach the best possible
>> accuracy! This is not a great problem if you keep NTPD running 24x7.
>
> Actually it is a problem for the best clock discipline,
> because it means that ntp also reacts very slowly to
> changes like temperature chages.
>
If temperature changes and the clock's reaction to them are a problem,
there are many things that can be done to create an environment that
will maintain a closely controlled temperature.
More information about the questions
mailing list