[ntp:questions] got the Sure GPS on order, how do I program it
elliott.ch at verizon.net
Mon Mar 12 18:08:06 UTC 2012
I found many copies of the "MTK NMEA Packet User Manual" by doing a Google
search on $PMTK[NNN]. Some are far more complete that others, and the GPS
chip in the SURE board may not implement all the instructions given in a
Purchasing a new soldering iron with a small tip is a great idea. Make sure
you cool the solder joint as soon as possible with your wet finger. Using
small diameter wire as indicated on www.satsignal.eu/ntp/Sure-GPS.htm is
also a good idea.
> -----Original Message-----
> From: questions-bounces+elliott.ch=verizon.net at lists.ntp.org
> [mailto:questions-bounces+elliott.ch=verizon.net at lists.ntp.org] On
> Behalf Of Ron Frazier (NTP)
> Sent: Tuesday, March 06, 2012 10:34 PM
> Cc: questions at lists.ntp.org
> Subject: Re: [ntp:questions] got the Sure GPS on order, how do I
> program it
> On 3/6/2012 6:15 AM, Terje Mathisen wrote:
> > Ron Frazier (NTP) wrote:
> >> Hi all,
> >> OK, I went and ordered the Sure GPS board, cables, box, hardware,
> >> etc. I even bought a cheapie soldering station for $ 20. Other than
> >> the mechanical setup which I can figure out and the patches which
> >> David Taylor has documented, I need to know how to program the unit
> >> when it comes.
> >> Specifically, can someone tell me how to:
> >> * change the baud rate
> >> * change which sentences are output
> >> * change the update interval
> >> * enable waas, if that matters for timing
> >> * set fixed location mode, if available
> >> * restore nav mode
> >> * do a warm restart
> >> * do a cold restart
> >> * do a reset to factory defaults
> >> * save the settings to flash or backup memory so I don't lose them
> >> when it's powered off
> >> * if possible, output only the GPZDA sentence
> >> * Any other magic you think I should know.
> > I wrote a program to do exactly what you want, I think I posted a
> > to the source code and (windows) executable.
> > If you can't find it, email me.
> > Terje
> Hi Terje,
> (Anyone can answer.)
> I found this old message from April by you. Here's part of it.
> quote on ->
> I.e. the proper programming setup seems to be:
> 1: Listen to incoming chars.
> 2: After a CRLF sequence, start a timer: If a new char arrives within
> less than 40 ms, goto 1.
> 3: Send '0', start timer waiting for CD to drop.
> 4: If CD drops before any new chars arrive, we are ready to send our
> command, so send it out before the 100 ms gps timeout.
> <- quote off
> So, here's my question. Based on your comments, the Sure board is
> using, and driving the CD line for it's own purposes. So, if we're
> soldering a wire to the CD line on the RS-232 connector, aren't we
> going to be in conflict with the boards own functions?
> (PS - If you email me and don't get a quick response, don't be
> I get about 300 emails per day from alternate energy mailing lists and
> such. I don't always see new messages very quickly. If you need a
> reply and have not heard from me in 1 - 2 weeks, send your message
> Ron Frazier
> timekeepingdude AT c3energy.com
> questions mailing list
> questions at lists.ntp.org
More information about the questions