[ntp:questions] Using Trimble TSIP under Linux

Rob nomail at example.com
Sun Oct 28 08:28:51 UTC 2012

David Taylor <david-taylor at blueyonder.co.uk.invalid> wrote:
> First problem with gpsd resolved, I needed a "-n" on the command-line!
> Next step is to see how the time a GPIO pin is triggered can be written 
> into the SHM memory block, or whatever....

gpsd writes the time into the SHM block.
you need a serial port with data and DCD, and connect the pulse per
second output of the trimble to the DCD.
when that works you will have two SHM blocks, one with the time from
the serial messages and another with the time from the PPS.

More information about the questions mailing list