[ntp:questions] Acutime Gold

[E-Mail Sent to this address will be added to the BlackLists]

Mark C. Stephens wrote:
> remote           refid  st t when poll reach  delay   offset  jitter
> ====================================================================
> oPPS(0)          .PPS.   0 l    4   16  377   0.000   -0.003   0.005
> *GPS_PALISADE(0) .GPS.   0 l    4   16  377   0.000    0.014   0.002
>
> For the above wouldn't I need to advance PPS by time1 0.003?

I don't think so.


> And retard the palisade by time1 -0.014?
> Assuming these are the average values.
>
> Because I tried those values and the PPS got marked bad ticker and the palisade
>  was unreachable!

AFAIK, the way most people do it, is to have several refclocks / servers,
 and change to noselect, the one you want to check the serial end
 of line offset; let it run for a day or two, and take the average.

According to the driver doc,
 a serial end of line time1 offset of around 20ms is common.

You might also need to increase the mindist.

You might also want to prefer the PPS.


-- 
E-Mail Sent to this address <BlackList at Anitech-Systems.com>
  will be added to the BlackLists.