[ntp:questions] server reject reason

ganesh ganeshsubramonian at gmail.com
Mon Dec 1 16:06:07 UTC 2014


Hi,

I see that randomly the ntp condition says reject (with configuration below).
Can someone help me understand why ?
I thought that if there is a "reject" it is always accompanied by a non-zero flash code ?

ntpq> as

ind assid status  conf reach auth condition  last_event cnt
===========================================================
  1 55971  901a   yes   yes  none    reject    sys_peer  1
  2 55972  8811   yes  none  none    reject    mobilize  1
  3 55973  9094   yes   yes  none    reject   reachable  9

ntpq> rv 55971
associd=55971 status=901a conf, reach, sel_reject, 1 event, sys_peer,
srcadr=10.255.251.133, srcport=123, dstadr=10.255.252.190, dstport=123,
leap=00, stratum=5, precision=-10, rootdelay=39.810, rootdisp=31.509,
refid=10.55.6.1,
reftime=d81f76f7.f88179f8  Tue, Nov 25 2014 21:45:27.970,
rec=d81f78ec.c321c518  Tue, Nov 25 2014 21:53:48.762, reach=377,
unreach=0, hmode=3, pmode=4, hpoll=9, ppoll=9, headway=0, flash=00 ok,
keyid=0, offset=5.572, delay=47.398, dispersion=21.375, jitter=11.026,
xleave=-0.118,
filtdelay=    95.51  119.15   83.34   47.40   92.38   78.00  107.02   72.85,
filtoffset=    2.11   -3.60  -11.89    5.57  -13.18    8.22    2.02   -3.29,
filtdisp=      1.95    9.72   17.57   25.41   33.38   41.07   49.08   57.20

ntpd-4.2.6p3 started as:
ntpd -n -U 180 -c /etc/ntpd.conf -A -p /tmp/ntpd.pid

server 10.255.251.133 iburst prefer minpoll 4 maxpoll 9
enable calibrate
tinker panic 2112912000 stepout 128
broadcast 127.1.255.255 minpoll 4
server 127.127.1.1 minpoll 4 maxpoll 5
fudge 127.127.1.1 stratum 6
interface listen all
logfile /tmp/ntpd.log
logconfig +allinfo +allevents +allstatistics +allstatus
driftfile /tmp/ntpd.drift

thanks
ganesh



More information about the questions mailing list