[ntp:questions] Fw: NTP and Trimble TSIP

[Paul]

On Tue, Feb 16, 2016 at 7:40 PM, Brian Inglis <
Brian.Inglis at systematicsw.ab.ca> wrote:

>
> This module specs don't mention frequency output other than 1PPS which is
> specced within 60ns, so much better than almost all. If it also supports
> TRAIM and sawtooth correction, the driver can improve on that.


See http://www.trimble.com/timing/ICM-SMT-360.aspx.

This is  $50 quant. 1 Resolution SMT with a $2 TCXO (the 10MHz is presented
on pin 23).

It's GPSDO but it's not a T-bolt E.  24 hour hold-over 100x10^-9 vs
1x10^-12 .