[ntp:announce] NTP 4.2.8p11 Released

Harlan Stenn stenn at nwtime.org
Tue Feb 27 23:44:06 UTC 2018


Talent, OR - 2018/02/27 - Network Time Foundation (NTF) is pleased
to announce that NTP 4.2.8p11, a Point Release of the Reference
Implementation of the Network Time Protocol (NTP) software, is now
available at http://www.ntp.org/downloads.html and
http://support.ntp.org/download.

File-size: 7076566 bytes

MD5 sum: 00950ca2855579541896513e78295361  ntp-4.2.8p11.tar.gz
This release fixes 2 low-/medium-, 1 informational/medium-, and 2
low-severity
vulnerabilities in ntpd, one medium-severity vulnerability in ntpq, and
provides 65 other non-security fixes and improvements:

* NTP Bug 3454: Unauthenticated packet can reset authenticated interleaved
	association (LOW/MED)
   Date Resolved: Stable (4.2.8p11) 27 Feb 2018
   References: Sec 3454 / CVE-2018-7185 / VU#961909
   Affects: ntp-4.2.6, up to but not including ntp-4.2.8p11.
   CVSS2: MED 4.3 (AV:N/AC:M/Au:N/C:N/I:N/A:P) This could score between
	2.9 and 6.8.
   CVSS3: LOW 3.1 CVSS:3.0/AV:N/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L This could
	score between 2.6 and 3.1
   Summary:
	The NTP Protocol allows for both non-authenticated and
	authenticated associations, in client/server, symmetric (peer),
	and several broadcast modes. In addition to the basic NTP
	operational modes, symmetric mode and broadcast servers can
	support an interleaved mode of operation. In ntp-4.2.8p4 a bug
	was inadvertently introduced into the protocol engine that
	allows a non-authenticated zero-origin (reset) packet to reset
	an authenticated interleaved peer association. If an attacker
	can send a packet with a zero-origin timestamp and the source
	IP address of the "other side" of an interleaved association,
	the 'victim' ntpd will reset its association. The attacker must
	continue sending these packets in order to maintain the
	disruption of the association. In ntp-4.0.0 thru ntp-4.2.8p6,
	interleave mode could be entered dynamically. As of ntp-4.2.8p7,
	interleaved mode must be explicitly configured/enabled.
   Mitigation:
	Implement BCP-38.
	Upgrade to 4.2.8p11, or later, from the NTP Project Download Page
	    or the NTP Public Services Project Download Page.
	If you are unable to upgrade to 4.2.8p11 or later and have
	    'peer HOST xleave' lines in your ntp.conf file, remove the
	    'xleave' option.
	Have enough sources of time.
	Properly monitor your ntpd instances.
	If ntpd stops running, auto-restart it without -g .
   Credit:
   	This weakness was discovered by Miroslav Lichvar of Red Hat.

* NTP Bug 3453: Interleaved symmetric mode cannot recover from bad
	state (LOW/MED)
   Date Resolved: Stable (4.2.8p11) 27 Feb 2018
   References: Sec 3453 / CVE-2018-7184 / VU#961909
   Affects: ntpd in ntp-4.2.8p4, up to but not including ntp-4.2.8p11.
   CVSS2: MED 4.3 (AV:N/AC:M/Au:N/C:P/I:N/A:N)
	Could score between 2.9 and 6.8.
   CVSS3: LOW 3.1 - CVSS:3.0/AV:N/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:L
	Could score between 2.6 and 6.0.
   Summary:
   	The fix for NtpBug2952 was incomplete, and while it fixed one
	problem it created another.  Specifically, it drops bad packets
	before updating the "received" timestamp.  This means a
	third-party can inject a packet with a zero-origin timestamp,
	meaning the sender wants to reset the association, and the
	transmit timestamp in this bogus packet will be saved as the
	most recent "received" timestamp.  The real remote peer does
	not know this value and this will disrupt the association until
	the association resets.
   Mitigation:
	Implement BCP-38.
	Upgrade to ntp-4.2.8p11 or later from the NTP Project Download Page
	    or the NTP Public Services Project Download Page.
	Use authentication with 'peer' mode.
	Have enough sources of time.
	Properly monitor your ntpd instances.
	If ntpd stops running, auto-restart it without -g .
   Credit:
   	This weakness was discovered by Miroslav Lichvar of Red Hat.

* NTP Bug 3415: Provide a way to prevent authenticated symmetric passive
	peering (LOW)
   Date Resolved: Stable (4.2.8p11) 27 Feb 2018
   References: Sec 3415 / CVE-2018-7170 / VU#961909
   	       Sec 3012 / CVE-2016-1549 / VU#718152
   Affects: All ntp-4 releases up to, but not including 4.2.8p7, and
   	4.3.0 up to, but not including 4.3.92.  Resolved in 4.2.8p11.
   CVSS2: LOW 3.5 - (AV:N/AC:M/Au:S/C:N/I:P/A:N)
   CVSS3: LOW 3.1 - CVSS:3.0/AV:N/AC:H/PR:L/UI:N/S:U/C:N/I:L/A:N
   Summary:
	ntpd can be vulnerable to Sybil attacks.  If a system is set up to
	use a trustedkey and if one is not using the feature introduced in
	ntp-4.2.8p6 allowing an optional 4th field in the ntp.keys file to
	specify which IPs can serve time, a malicious authenticated peer
	-- i.e. one where the attacker knows the private symmetric key --
	can create arbitrarily-many ephemeral associations in order to win
	the clock selection of ntpd and modify a victim's clock.  Three
	additional protections are offered in ntp-4.2.8p11.  One is the
	new 'noepeer' directive, which disables symmetric passive
	ephemeral peering. Another is the new 'ippeerlimit' directive,
	which limits the number of peers that can be created from an IP.
	The third extends the functionality of the 4th field in the
	ntp.keys file to include specifying a subnet range.
   Mitigation:
	Implement BCP-38.
	Upgrade to ntp-4.2.8p11 or later from the NTP Project Download Page
	    or the NTP Public Services Project Download Page.
	Use the 'noepeer' directive to prohibit symmetric passive
	    ephemeral associations.
	Use the 'ippeerlimit' directive to limit the number of peers
	    that can be created from an IP.
	Use the 4th argument in the ntp.keys file to limit the IPs and
	    subnets that can be time servers.
	Have enough sources of time.
	Properly monitor your ntpd instances.
	If ntpd stops running, auto-restart it without -g .
   Credit:
	This weakness was reported as Bug 3012 by Matthew Van Gundy of
	Cisco ASIG, and separately by Stefan Moser as Bug 3415.

* ntpq Bug 3414: decodearr() can write beyond its 'buf' limits (Medium)
   Date Resolved: 27 Feb 2018
   References: Sec 3414 / CVE-2018-7183 / VU#961909
   Affects: ntpq in ntp-4.2.8p6, up to but not including ntp-4.2.8p11.
   CVSS2: MED 6.8 (AV:N/AC:M/Au:N/C:P/I:P/A:P)
   CVSS3: MED 5.0 CVSS:3.0/AV:N/AC:H/PR:N/UI:R/S:U/C:L/I:L/A:L
   Summary:
   	ntpq is a monitoring and control program for ntpd.  decodearr()
	is an internal function of ntpq that is used to -- wait for it --
	decode an array in a response string when formatted data is being
	displayed.  This is a problem in affected versions of ntpq if a
	maliciously-altered ntpd returns an array result that will trip this
	bug, or if a bad actor is able to read an ntpq request on its way to
	a remote ntpd server and forge and send a response before the remote
	ntpd sends its response.  It's potentially possible that the
	malicious data could become injectable/executable code.
   Mitigation:
	Implement BCP-38.
	Upgrade to ntp-4.2.8p11 or later from the NTP Project Download Page
	    or the NTP Public Services Project Download Page.
   Credit:
	This weakness was discovered by Michael Macnair of Thales e-Security.

* NTP Bug 3412: ctl_getitem(): buffer read overrun leads to undefined
	behavior and information leak (Info/Medium)
   Date Resolved: 27 Feb 2018
   References: Sec 3412 / CVE-2018-7182 / VU#961909
   Affects: ntp-4.2.8p6, up to but not including ntp-4.2.8p11.
   CVSS2: INFO 0.0 - MED 5.0 (AV:N/AC:L/Au:N/C:P/I:N/A:N) 0.0 if C:N
   CVSS3: NONE 0.0 - MED 5.3 CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N
	0.0 if C:N
   Summary:
	ctl_getitem()  is used by ntpd to process incoming mode 6 packets.
	A malicious mode 6 packet can be sent to an ntpd instance, and
	if the ntpd instance is from 4.2.8p6 thru 4.2.8p10, that will
	cause ctl_getitem() to read past the end of its buffer.
   Mitigation:
	Implement BCP-38.
	Upgrade to ntp-4.2.8p11 or later from the NTP Project Download Page
	    or the NTP Public Services Project Download Page.
	Have enough sources of time.
	Properly monitor your ntpd instances.
	If ntpd stops running, auto-restart it without -g .
   Credit:
   	This weakness was discovered by Yihan Lian of Qihoo 360.

* NTP Bug 3012: Sybil vulnerability: ephemeral association attack
   Also see Bug 3415, above.
   Date Mitigated: Stable (4.2.8p7) 26 Apr 2016; Dev (4.3.92) 26 Apr 2016
   Date Resolved: Stable (4.2.8p11) 27 Feb 2018
   References: Sec 3012 / CVE-2016-1549 / VU#718152
   Affects: All ntp-4 releases up to, but not including 4.2.8p7, and
	4.3.0 up to, but not including 4.3.92.  Resolved in 4.2.8p11.
   CVSS2: LOW 3.5 - (AV:N/AC:M/Au:S/C:N/I:P/A:N)
   CVSS3: MED 5.3 - CVSS:3.0/AV:N/AC:H/PR:L/UI:N/S:U/C:N/I:H/A:N
   Summary:
	ntpd can be vulnerable to Sybil attacks.  If a system is set up
	to use a trustedkey and if one is not using the feature
	introduced in ntp-4.2.8p6 allowing an optional 4th field in the
	ntp.keys file to specify which IPs can serve time, a malicious
	authenticated peer -- i.e. one where the attacker knows the
	private symmetric key -- can create arbitrarily-many ephemeral
	associations in order to win the clock selection of ntpd and
	modify a victim's clock.  Two additional protections are
	offered in ntp-4.2.8p11.  One is the 'noepeer' directive, which
	disables symmetric passive ephemeral peering. The other extends
	the functionality of the 4th field in the ntp.keys file to
	include specifying a subnet range.
   Mitigation:
	Implement BCP-38.
	Upgrade to 4.2.8p11, or later, from the NTP Project Download Page or
	    the NTP Public Services Project Download Page.
	Use the 'noepeer' directive to prohibit symmetric passive
	    ephemeral associations.
	Use the 'ippeerlimit' directive to limit the number of peer
	    associations from an IP.
	Use the 4th argument in the ntp.keys file to limit the IPs
	    and subnets that can be time servers.
	Properly monitor your ntpd instances.
   Credit:
   	This weakness was discovered by Matthew Van Gundy of Cisco ASIG.

* Bug fixes:
 [Bug 3457] OpenSSL FIPS mode regression <perlinger at ntp.org>
 [Bug 3455] ntpd doesn't use scope id when binding multicast
<perlinger at ntp.org>
 - applied patch by Sean Haugh  [Bug 3452] PARSE driver prints
uninitialized memory. <perlinger at ntp.org>
 [Bug 3450] Dubious error messages from plausibility checks in get_systime()
 - removed error log caused by rounding/slew, ensured postcondition
<perlinger at ntp.org>
 [Bug 3447] AES-128-CMAC (fixes) <perlinger at ntp.org>
 - refactoring the MAC code, too
 [Bug 3441] Validate the assumption that AF_UNSPEC is 0.  stenn at ntp.org
 [Bug 3439] When running multiple commands / hosts in ntpq...
<perlinger at ntp.org>
 - applied patch by ggarvey
 [Bug 3438] Negative values and values 999 days in... <perlinger at ntp.org>
 - applied patch by ggarvey (with minor mods)
 [Bug 3437] ntpd tries to open socket with AF_UNSPEC domain
 - applied patch (with mods) by Miroslav Lichvar <perlinger at ntp.org>
 [Bug 3435] anchor NTP era alignment <perlinger at ntp.org>
 [Bug 3433] sntp crashes when run with -a.  <stenn at ntp.org>
 [Bug 3430] ntpq dumps core (SIGSEGV) for "keytype md2"
 - fixed several issues with hash algos in ntpd, sntp, ntpq,
   ntpdc and the test suites <perlinger at ntp.org>
 [Bug 3424] Trimble Thunderbolt 1024 week millenium bug <perlinger at ntp.org>
 - initial patch by Daniel Pouzzner
 [Bug 3423] QNX adjtime() implementation error checking is
 wrong <perlinger at ntp.org>
 [Bug 3417] ntpq ifstats packet counters can be negative
 made IFSTATS counter quantities unsigned <perlinger at ntp.org>
 [Bug 3411] problem about SIGN(6) packet handling for ntp-4.2.8p10
 - raised receive buffer size to 1200 <perlinger at ntp.org>
 [Bug 3408] refclock_jjy.c: Avoid a wrong report of the coverity static
 analysis tool. <abe at ntp.org>
 [Bug 3405] update-leap.in: general cleanup, HTTPS support.  Paul McMath.
 [Bug 3404] Fix openSSL DLL usage under Windows <perlinger at ntp.org>
 - fix/drop assumptions on OpenSSL libs directory layout
 [Bug 3399] NTP: linker error in 4.2.8p10 during Linux cross-compilation
 - initial patch by timeflies at mail2tor.com  <perlinger at ntp.org>
 [Bug 3398] tests fail with core dump <perlinger at ntp.org>
 - patch contributed by Alexander Bluhm
 [Bug 3397] ctl_putstr() asserts that data fits in its buffer
 rework of formatting & data transfer stuff in 'ntp_control.c'
 avoids unecessary buffers and size limitations. <perlinger at ntp.org>
 [Bug 3394] Leap second deletion does not work on ntpd clients
 - fixed handling of dynamic deletion w/o leap file <perlinger at ntp.org>
 [Bug 3391] ntpd segfaults on startup due to small warmup thread stack size
 - increased mimimum stack size to 32kB <perlinger at ntp.org>
 [Bug 3367] Faulty LinuxPPS NMEA clock support in 4.2.8 <perlinger at ntp.org>
 - reverted handling of PPS kernel consumer to 4.2.6 behavior
 [Bug 3365] Updates driver40(-ja).html and miscopt.html <abe at ntp.org>
 [Bug 3358] Spurious KoD log messages in .INIT. phase.  HStenn.
 [Bug 3016] wrong error position reported for bad ":config pool"
 - fixed location counter & ntpq output <perlinger at ntp.org>
 [Bug 2900] libntp build order problem.  HStenn.
 [Bug 2878] Tests are cluttering up syslog <perlinger at ntp.org>
 [Bug 2737] Wrong phone number listed for USNO. ntp-bugs at bodosom.net,
 perlinger at ntp.org
 [Bug 2557] Fix Thunderbolt init. ntp-bugs at bodosom.net, perlinger at ntp.
 [Bug 948] Trustedkey config directive leaks memory. <perlinger at ntp.org>
 Use strlcpy() to copy strings, not memcpy().  HStenn.
 Typos.  HStenn.
 test_ntp_scanner_LDADD needs ntpd/ntp_io.o.  HStenn.
 refclock_jjy.c: Add missing "%s" to an msyslog() call.  HStenn.
 Build ntpq and libntpq.a with NTP_HARD_*FLAGS.  perlinger at ntp.org
 Fix trivial warnings from 'make check'. perlinger at ntp.org
 Fix bug in the override portion of the compiler hardening macro. HStenn.
 record_raw_stats(): Log entire packet.  Log writes.  HStenn.
 AES-128-CMAC support.  BInglis, HStenn, JPerlinger.
 sntp: tweak key file logging.  HStenn.
 sntp: pkt_output(): Improve debug output.  HStenn.
 update-leap: updates from Paul McMath.
 When using pkg-config, report --modversion.  HStenn.
 Clean up libevent configure checks.  HStenn.
 sntp: show the IP of who sent us a crypto-NAK.  HStenn.
 Allow .../N to specify subnet bits for IPs in ntp.keys.  HStenn,
JPerlinger.
 authistrustedip() - use it in more places.  HStenn, JPerlinger.
 New sysstats: sys_lamport, sys_tsrounding.  HStenn.
 Update ntp.keys .../N documentation.  HStenn.
 Distribute testconf.yml.  HStenn.
 Add DPRINTF(2,...) lines to receive() for packet drops.  HStenn.
 Rename the configuration flag fifo variables.  HStenn.
 Improve saveconfig output.  HStenn.
 Decode restrict flags on receive() debug output.  HStenn.
 Decode interface flags on receive() debug output.  HStenn.
 Warn the user if deprecated "driftfile name WanderThreshold" is used.
HStenn.
 Update the documentation in ntp.conf.def .  HStenn.
 restrictions() must return restrict flags and ippeerlimit.  HStenn.
 Update ntpq peer documentation to describe the 'p' type.  HStenn.
 Rename restrict 'flags' to 'rflags.  Use an enum for the values.  HStenn.
 Provide dump_restricts() for debugging.  HStenn.
 Use consistent 4th arg type for [gs]etsockopt.  JPerlinger.

* Other items:

* update-leap needs the following perl modules:
	Net::SSLeay
	IO::Socket::SSL

* New sysstats variables: sys_lamport, sys_tsrounding
See them with: ntpq -c "rv 0 ss_lamport,ss_tsrounding"
sys_lamport counts the number of observed Lamport violations, while
sys_tsrounding counts observed timestamp rounding events.

* New ntp.conf items:

- restrict ... noepeer
- restrict ... ippeerlimit N

The 'noepeer' directive will disallow all ephemeral/passive peer
requests.

The 'ippeerlimit' directive limits the number of time associations
for each IP in the designated set of addresses.  This limit does not
apply to explicitly-configured associations.  A value of -1, the current
default, means an unlimited number of associations may connect from a
single IP.  0 means "none", etc.  Ordinarily the only way multiple
associations would come from the same IP would be if the remote side
was using a proxy.  But a trusted machine might become compromised,
in which case an attacker might spin up multiple authenticated sessions
from different ports.  This directive should be helpful in this case.

* New ntp.keys feature: Each IP in the optional list of IPs in the 4th
field may contain a /subnetbits specification, which identifies  the
scope of IPs that may use this key.  This IP/subnet restriction can be
used to limit the IPs that may use the key in most all situations where
a key is used.
--

Please report any bugs, issues, or desired enhancements at
http://bugs.ntp.org/.

Network Time Foundation's NTP (Network Time Protocol) Project
offers end-user and developer support at http://support.ntp.org/,
with additional resources and information about
NTF's Reference Implementation of NTP at http://www.ntp.org/.

Support NTF's Network Time efforts - donate or join at http://nwtime.org .




More information about the announce mailing list