[ntp:commitlogs] incoming pull in whimsy.udel.edu:/backroom/ntp-stable

Harlan Stenn stenn at whimsy.udel.edu
Tue Nov 11 00:10:35 PST 2003


VAR       CLIENT              SERVER              
===       ======              ======              
USER      stenn               stenn               
HOST      whimsy.udel.edu     pogo.udel.edu       
ROOT      /backroom/ntp-stable/pogo/users/mayer/ntp-dev-io
LEVEL     1                   1                   
TIME_T    1042609353          1042609353          
UTC       20030115054233      20030115054233      
VERSION   bk-3.0.1            bk-3.0.1            

stenn at whimsy.udel.edu fired the post-incoming--010commitlogs trigger in /backroom/ntp-stable
    Received the following changesets
    
    ChangeSet
      1.1168 03/11/08 20:32:39 mayer at tecotoo.myibg.com +1 -0
      Ensure config.h is included in ntp_rfx2553.h before testing macros
    
      include/ntp_rfc2553.h
        1.11 03/11/08 20:30:05 mayer at tecotoo.myibg.com +6 -0
        Ensure config.h is included before testing macros
    
    ChangeSet
      1.1167 03/11/08 16:49:43 mayer at tecotoo.myibg.com +5 -0
      Fixes to properly support platforms that do not have IPv6 support.
    
      ports/winnt/include/isc/platform.h
        1.3 03/11/08 16:49:06 mayer at tecotoo.myibg.com +5 -0
        The ISC_PLATFORM_HAVEIPV6 macro should not have been defined here.
        This was a vestige of the work being done to scan for IPv6 interfaces on
        Windows platforms.
    
      ports/winnt/include/isc/ipv6.h
        1.3 03/11/08 16:49:04 mayer at tecotoo.myibg.com +4 -2
        Make IPv6 Macro definitions only if not previously defined.
    
      libntp/ntp_rfc2553.c
        1.15 03/11/08 16:49:00 mayer at tecotoo.myibg.com +2 -2
        Use ISC_PLATFORM_HAVEIPV6 instead of HAVE_IPV6 which was previously
        defined in the ntp_rfc2553.h file based on the erroneously assumption about a
        macro.
    
      include/ntp_rfc2553.h
        1.10 03/11/08 16:48:56 mayer at tecotoo.myibg.com +2 -4
        Change to only use the definitions if IPv6 not defined on the platform. This uses the
        Macros defined during the config process which defines the Macro
        ISC_PLATFORM_HAVEIPV6 if the platform properly supports IPv6
    
      include/isc/ipv6.h
        1.4 03/11/08 16:48:51 mayer at tecotoo.myibg.com +4 -2
        Make IPv6 Macro definitions only if not previously defined.
    
    ChangeSet
      1.1166 03/11/07 21:27:53 mayer at pogo.udel.edu +1 -0
      Change HAVE_IPV6 macro to ISC_PLATFORM_HAVEIPV6 since BIND 9 does a better job of figuring out what's needed for IPv6
    
      ntpd/ntp_io.c
        1.96 03/11/07 21:25:26 mayer at pogo.udel.edu +26 -26
        Change HAVE_IPV6 macro to ISC_PLATFORM_HAVEIPV6 since BIND 9 does a better job of figuring out what's needed for IPv6
    
    ChangeSet
      1.1165 03/11/02 23:18:29 mayer at tecotoo.myibg.com +1 -0
      Fix setsockopt arguments to conform to standard declarations for various arguments
    
      ntpd/ntp_io.c
        1.95 03/11/02 23:17:43 mayer at tecotoo.myibg.com +4 -2
        Fix setsockopt arguments to conform to standard declarations for various arguments
    



More information about the commitlogs mailing list