[ntp:commitlogs] incoming pull in deacon.udel.edu:/deacon/backroom/ntp-dev

Harlan Stenn stenn at deacon.udel.edu
Tue Jan 4 08:02:43 UTC 2011


VAR       CLIENT              SERVER              
===       ======              ======              
USER      stenn               stenn               
HOST      deacon.udel.edu     psp-deb1.ntp.org    
ROOT      /deacon/backroom/ntp-dev/home/hart/ntp-dev-acts
LEVEL     1                   1                   
TIME_T    1292510795          1290142505          
UTC       20101216144635      20101119045505      
VERSION   bk-5.1              bk-5.0.2            

stenn at deacon.udel.edu fired the post-incoming--012commitlogs trigger in /deacon/backroom/ntp-dev
    Received the following changesets
    
    ChangeSet at 1.2414, 2011-01-04 07:06:40+00:00, davehart at shiny.ad.hartbrothers.com
      make V=0 and configure --enable-silent-rules supported.
    
      ChangeLog at 1.753 +1 -0
        make V=0 and configure --enable-silent-rules supported.
    
      configure.ac at 1.507 +5 -0
        support make V=0 and configure --enable-silent-rules
    
      sntp/configure.ac at 1.50 +5 -0
        support make V=0 and configure --enable-silent-rules
    
    ChangeSet at 1.2413, 2011-01-04 06:27:59+00:00, davehart at shiny.ad.hartbrothers.com
      setvar modemsetup = ATE0... overrides ACTS driver default.
      Preserve last timecode in ACTS driver (ntpq -ccv).
      Tolerate previous ATE1 state when sending ACTS setup.
      Enable raw tty line discipline in Windows port.
      Allow tty open/close/open to succeed on Windows port.
      Enable ACTS and CHU reference clock drivers on Windows.
    
      ChangeLog at 1.752 +8 -2
        setvar modemsetup = ATE0... overrides ACTS driver default.
        Preserve last timecode in ACTS driver (ntpq -ccv).
        Tolerate previous ATE1 state when sending ACTS setup.
        Enable raw tty line discipline in Windows port.
        Allow tty open/close/open to succeed on Windows port.
        Enable ACTS and CHU reference clock drivers on Windows.
        
    
      include/ntp_machine.h at 1.31 +0 -17
        consolidate windows/posix compatibility shims in ntp_types.h
    
      include/ntp_refclock.h at 1.27 +2 -1
        add active flag to struct refclockio to help dispense with pending
          refclock input on Windows serial port close.
    
      include/ntp_types.h at 1.22 +12 -1
        consolidate windows/posix compatibility shims in ntp_types.h
    
      include/ntpd.h at 1.158 +1 -0
        add get_ext_sys_var() to retrieve value of user-defined vars
    
      libntp/dolfptoa.c at 1.9 +3 -3
        quiet warning about signed/unsigned > comparison
    
      libntp/icom.c at 1.14 +10 -2
        enable CHU refclock for Windows ntpd
    
      libntp/msyslog.c at 1.31 +1 -3
        slight cleanup
    
      libntp/recvbuff.c at 1.35 +18 -14
        cleanup
    
      ntpd/complete.conf at 1.15 +1 -0
        add coverage for phone directive
    
      ntpd/ntp_config.c at 1.281 +1 -1
        quote phone strings in saveconfig output
    
      ntpd/ntp_control.c at 1.157 +30 -1
        add get_ext_sys_var() to retrieve value of user-defined vars
    
      ntpd/ntp_io.c at 1.341 +26 -21
        add active flag to struct refclockio to help dispense with pending
          refclock input on Windows serial port close.
        use closeserial() instead of close() for refclock ttys for Windows'
          port benefit.
    
      ntpd/refclock_acts.c at 1.42 +96 -64
        Increment pp->polls in acts_poll().
        Change UART rate from 9600 to 19200.
        Allow modem setup string override using: setvar modemsetup = ATE0...
        Tolerate echo of the setup string in case ATE1 was set previously.
        Buffer incomplete input lines in unit struct leaving pp->a_lastcode with
         the last complete line, allowing "ntpq -c cv" to retrieve it.
        Enable ACTS driver in the Windows port.
    
      ntpd/refclock_chu.c at 1.50 +2 -2
        Enable CHU driver in the Windows port (MINCHAR in Windows .h files).
    
      ntpd/refclock_pcf.c at 1.11 +2 -1
        attempt to avoid fault in pcf_shutdown() after unsuccessful start.
    
      ports/winnt/include/config.h at 1.90 +3 -0
        Enable ACTS and CHU refclock drivers in Windows port.
    
      ports/winnt/include/termios.h at 1.14 +8 -12
        Support raw line discipline and serial open/close/open in Windows port.
    
      ports/winnt/libntp/termios.c at 1.24 +134 -40
        Support raw line discipline and serial open/close/open in Windows port.
    
      ports/winnt/ntpd/ntp_iocompletionport.c at 1.55 +196 -70
        Support raw line discipline and serial open/close/open in Windows port.
    
      ports/winnt/vc6/libntp.dsp at 1.57 +4 -0
        Enable icom.c compile on Windows.
    
      ports/winnt/vc6/ntpd.dsp at 1.52 +0 -2
        Enable ACTS and CHU refclocks on Windows.
    
      ports/winnt/vs2003/libntp.vcproj at 1.15 +3 -0
        Enable icom.c compile on Windows.
    
      ports/winnt/vs2003/ntpd.vcproj at 1.13 +0 -42
        Enable ACTS and CHU refclocks on Windows.
    
      ports/winnt/vs2005/libntp.vcproj at 1.13 +4 -0
        Enable icom.c compile on Windows.
    
      ports/winnt/vs2005/ntpd.vcproj at 1.13 +0 -40
        Enable ACTS and CHU refclocks on Windows.
    
      ports/winnt/vs2008/libntp/libntp.vcproj at 1.34 +2 -4
        Enable icom.c compile on Windows.
    
      ports/winnt/vs2008/ntpd/ntpd.vcproj at 1.36 +2 -6
        Enable ACTS and CHU refclocks on Windows.
    


More information about the commitlogs mailing list