[Pool] [Fwd: Re: Linux , PPS, and Me]

[David Lord]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 3 Feb 2011 at 23:17, Alby wrote:

> 
>  What do you make of this?
> 
> 
> godzilla:/var/lib/setserial# gpspipe -r
> GPSD,R=1
> ^C
> godzilla:/var/lib/setserial#
> 
> 
>  I was following the notes in:
> 
>  http://www.rjsystems.nl/en/2100-ntpd-garmin-gps-18-lvc-gpsd.php
> 
> ..and it appears that I'm not seeing the mass of information I should
> be seeing. Could it be, that I might have hardware issues?

Can you try with a serial comms program? I used Telix
from a dos partition to check the serial output was ok
and to change the output string to GPRMC. Minicom from
Linux or NetBSD is just a bit more difficult to use 
for changing settings but displays the output strings
ok. I also tried setting to binary which could be an
advantage for sub microsecond but for me their seemed
to be no improvement so it was changed back to GPRMC.

David

- -- 
David Lord <david at lordynet.org>
<ftp://ftp.lordynet.org/pub/pgpkeys/lg_david.pkr>
<http://www.lordynet.org/pub/pgpkeys/lg_david.pkr>



-----BEGIN PGP SIGNATURE-----
Version: PGP 7.0.4 -- QDPGP 2.65 
Comment: http://community.wow.net/grt/qdpgp.html

iQA/AwUBTUve3q2RmIodDo7KEQIOegCeMRXwUR9JRiVbmamIEl0AvxMWz68An1na
b2V8dLVLX8OF6E/2yHvilIpr
=ERbB
-----END PGP SIGNATURE-----