[ntp:questions] Re: ntp: simple question

Mike G. mqg99 at cs.com
Mon Jan 19 22:10:08 UTC 2004


> See above. That line on the Redhat Linux 8 box says:
> ntpd 4.1.2 at 1.892
> 
> I could also tell from the debug lines from the interface setup.
> 
> Danny

Danny,

Sorry, you're right.  Too many platforms and versions.

Here's the output from Redhat 8, ntpd 4.2.0:

# ntpd -D4 -x
Debug1: 4 -> 4 = 4
ntpd 4.2.0 at 1.1161-r Thu Jan 15 10:46:32 MST 2004 (1)
Debug1: 4 -> 4 = 4
addto_syslog: ntpd 4.2.0 at 1.1161-r Thu Jan 15 10:46:32 MST 2004 (1)
addto_syslog: signal_no_reset: signal 13 had flags 4000000
addto_syslog: set_process_priority: Leave priority alone: priority_done is <2>
addto_syslog: precision = 2.000 usec
create_sockets(123)
addto_syslog: no IPv6 interfaces found
address_okay: listen Virtual: 1, IF name: lo, Up Flag: 1
address_okay: listen Virtual: 1, IF name: eth0, Up Flag: 1
bind() fd 4, family 2, port 123, addr 0.0.0.0, flags=8
flags for fd 4: 04002
bind() fd 5, family 2, port 123, addr 127.0.0.1, flags=0
flags for fd 5: 04002
bind() fd 6, family 2, port 123, addr 141.138.9.113, flags=8
flags for fd 6: 04002
create_sockets: ninterfaces=3
interface 0:  fd=4,  bfd=-1,  name=wildcard,  flags=0x8
              sin=0.0.0.0  bcast=0.0.0.0,  mask=255.255.255.255
interface 1:  fd=5,  bfd=-1,  name=lo,  flags=0x5
              sin=127.0.0.1  mask=255.0.0.0
interface 2:  fd=6,  bfd=-1,  name=eth0,  flags=0x9
              sin=141.138.9.113  bcast=141.138.9.255,  mask=255.255.255.0
init_io: maxactivefd 6
local_clock: at 0 state 0
Debug2: 4 -> 4 = 4
getaddrinfo 127.0.0.1
getnetnum given 127.0.0.1, got 127.0.0.1
getaddrinfo ntpsever
Memory fault



More information about the questions mailing list