[ntp:questions] Re: reference clock 35: Help !!!!!!!!!!
Henk Jan Dekker
henkjandekker at xs4all.nl
Fri Jan 30 18:23:15 UTC 2004
yes there is solaris 8 running on it.
when you look in the driver page for ntp version 4.0.99 and above then you
see that the reference clock for driver 35 is connected to the /dev/ecpp0
"Hans Jørgen Jakobsen" <hjj at wheel.dk> schreef in bericht
news:slrnc1l0ls.qj3.hjj at freesbee.wheel.dk...
> On Thu, 29 Jan 2004 21:39:08 +0100, Henk Jan Dekker wrote:
> > hello, i have a reference clock conected to the parallel port of an
> > 450. this is a conrad clock, as discribed in the driver 35
> > i tried several things. at first i just installed the packages, that i
> > downloaded from sunfreeware. this package's has the driver 35 in it, and
> > should support it. i made al link to the ecpp0 and pcfclock0 and added
> > line
> > server 127.127.35.0 to the ntp.conf
> > i thougt that this should be ok. but nothing happens
> > on my console i see the error:
> > clock PCF (0) event 'clk_fault' (0x03)
> Which operating system? Solaris?
> I dont recall having seen any support on the parallel port in Solaris
> for clocks (pps).
More information about the questions