[ntp:questions] Re: Reference clocks - which?

Richard B. Gilbert rgilbert88 at comcast.net
Sat Oct 30 02:18:21 UTC 2004


Tapio Sokura wrote:

> Richard B. Gilbert wrote:
>
>> A Motorola Oncore M12+T GPS receiver is available from Synergy 
>> Systems <http://www.synergy-gps.com/>
>> for around $200US.  This is far better than what you say you need.  It 
>
>
> They also have used, but fully functional Oncore VPs for sale for 
> something like 30-40 USD (see the excess inventory link on the front 
> page). In addition to the GPS itself you need a suitable antenna and 
> power supply along with 5 volt regulation and a max232 circuit for 
> serial port level conversion.
>
> Anyway, a GPS synchronized time server can be built for considerably 
> under 100 USD, not counting the PC itself. You just need to tinker a 
> bit with the additional circuits and provide some kind of housing for 
> them and the GPS board. The timing performance of Oncore VPs is 
> excellent, generally the performance of the whole system is more 
> limited by the PC than the GPS receiver.
>
>> requires that you be able site an antenna where it will have an 
>> unobstructed view of the sky.
>
>
> I run my 6 channel Oncore VP with a magmount antenna located indoors 
> and it is working fine with an average of 1-2 satellites tracked. When 
> the position hold feature of the GPS receiver is used, one satellite 
> is enough for timing. Of course more is better and more reliable, but 
> you can make do with a quite limited view of the sky as well.
>
>   Tapio

I wish I knew how to do that.  With NTP 4.2.0 at 1.1161-r the Oncore driver 
seems to need 4 satellites in order to be "reachable"!  As a result, 
mine works only about thirty percent of the time.   For whatever reason, 
I get the best reception from about 9:00PM EDT to about 9:00AM.




More information about the questions mailing list