[ntp:questions] Re: AIX ntp.conf problem

Danny Mayer mayer at gis.net
Tue Oct 11 02:28:10 UTC 2005


DJ wrote:
> Here is output from ntpd (n.b. DNS name space is intranet rather than
> internet)
> 
> ./ntpd -D 3 -n -c ./x.conf
> Debug1: 3 -> 3 = 3
> Debug1: 3 -> 3 = 3
> create_sockets(123)
> interface <en0> OK
> ignoring en0 - not AF_INET
> interface <en0> OK
> interface <en0> OK
> interface <en0> OK
> interface <lo0> OK
> ignoring lo0 - not AF_INET
> interface <lo0> OK
> interface <lo0> OK
> ignoring lo0 - not AF_INET
> bind() fd 4, family 2, port 123, addr 0.0.0.0, flags=1
> flags for fd 4: 0400006
> bind() fd 5, family 2, port 123, addr 138.64.1.19, flags=1
> flags for fd 5: 0400006
> bind() fd 6, family 2, port 123, addr 138.64.240.11, flags=1
> flags for fd 6: 0400006
> bind() fd 7, family 2, port 123, addr 138.64.240.15, flags=1
> flags for fd 7: 0400006
> bind() fd 8, family 2, port 123, addr 127.0.0.1, flags=1
> flags for fd 8: 0400006
> create_sockets: ninterfaces=5
> interface 0:  fd=4,  bfd=0,  name=wildcard,  flags=0x1
>               sin=0.0.0.0  bcast=0.0.0.0,  mask=255.255.255.255
> interface 1:  fd=5,  bfd=0,  name=en0,  flags=0x1
>               sin=138.64.1.19  bcast=138.64.255.255,  mask=255.255.0.0
> interface 2:  fd=6,  bfd=0,  name=en0,  flags=0x1
>               sin=138.64.240.11  bcast=138.64.255.255,
> mask=255.255.0.0
> interface 3:  fd=7,  bfd=0,  name=en0,  flags=0x1
>               sin=138.64.240.15  bcast=138.64.255.255,
> mask=255.255.0.0
> interface 4:  fd=8,  bfd=0,  name=lo0,  flags=0x5
>               sin=127.0.0.1  bcast=127.255.255.255,  mask=255.0.0.0
> init_io: maxactivefd 8
> Debug2: 3 -> 3 = 3
> resolving test.internal.net
> config: test.internal.net 3 4 6 10 0 0 0 *
> authtrust: keyid 0000ffff life 1
> report_event: system event 'event_restart' (0x01) status 'sync_alarm,
> sync_unspec, 1 event, event_unspec' (0xc010)
> auth_agekeys: at 1 keys 1 expired 0
> 

Please upgrade. This is very old code. Then if you still have problems 
we can take another look at the code. I'd also be very interested in 
looking at the config.h that got built during the configuration phase.

Danny



More information about the questions mailing list