[ntp:questions] Re: local DCF-clock not connected to RxD
reinhold at bachrain.de
Thu Jul 6 10:54:55 UTC 2006
> If you can dispense with the rs-232-> usb , then why not try
> connecting to DCD and using the SHM driver in conjunction
> with Jonathan Buzzards DCF radioclock daemon.
thank you very much. Works great :)
> There is no needfor any particular baud rate to be set
> as there is no host -> refclock comms. You would probably
> need to check the polarity of the signal as it uses assert
> to start the timing of interrupts and signal pulse length
> on the DCD pin.
I've modified radioclock to invert DCD for a first test. Now our
hardware group have to do this right...
More information about the questions