[ntp:questions] Re: AW: convert_rawdcf: parity check FAILED on my embedded Linux system

Uwe Klein uwe_klein_habertwedt at t-online.de
Fri Oct 13 19:51:59 UTC 2006


Hi Torsten,
OK, i have had a look at the FOX Board docs.

the serial line ttyS0 is TTL level IO ( 3.3V, 5V tolerant)
on the break out header.
Now if you connect your RS232 Level Signals to this
signal sense is inverted (AND you may ruin the inputs)

uwe




More information about the questions mailing list