[ntp:questions] Re: Hardware clock fails to update.
Ulrich.Windl at RZ.Uni-Regensburg.DE
Fri Sep 15 07:25:05 UTC 2006
fmgrotepass at yahoo.co.uk (Frans Grotepass) writes:
> Our embedded system syncs with the server via NTP. The kernel (2.6.9) has RTC
> set to UTC. When the system boots up, the hardware clock is off by 7200
> seconds. When NTP syncs, the system time is set correctly and the system runs
> synced for a decent while (2 hours). The system is then powered down and
> restarted. Upon restarting, the clock returns to its 7200 second offset.
> Various internet searches pointed to the fact that hardware clock syncing
> being placed under the responsibility of ntp. Is this really the case? If so,
> how can I check that NTP tries to update the hardware clock?
Please try to read "18.104.22.168.1. How can I read or write the CMOS clock?" in the
NTP FAQ. The linux kernel does not write the full time back to the RTC AFAIK,
and other programs during startup/shutdown may be involved when messing with
the RTC chip.
More information about the questions