[ntp:questions] ACTS: client does not accept acts synchronized server

Heiko Gerstung heiko.removethistext.gerstung at meinberg.de
Wed Apr 25 13:38:20 UTC 2007


Hi!

Despite the fact that my ACTS synchronized time server seems to be 
working fine, my client does not accept it.

Any other parameters I have to change?

"ntpq -p" on server
(the GPS/PPS sources are noselect and only used for measuring the 
accuracy of the ACTS source)

      remote           refid      st t when poll reach   delay   offset 
  jitter
==============================================================================
  server          .INIT.          16 l    - 1024    0    0.000    0.000 
   0.000
  GENERIC(0)      .GPS.            0 l    5   64  377    0.000   47.289 
   0.391
  PPS(0)          .PPS.            0 l   36   64  377    0.000   47.228 
   0.341
*ACTS_MODEM(1)   .PTB.            0 l  127 1024  377    0.000   -4.530 
  4.289


"ntpq -p" on client
(the server is the second association)

      remote           refid      st t when poll reach   delay   offset 
  jitter
==============================================================================
*gateway.py.mein .GPSi.           1 u    3   64  377    0.131    3.278 
  0.042
  rsvd-heiko-229. .INIT.          16 u   50 1024    0    0.000    0.000 
   0.000


Best Regards,
Heiko




More information about the questions mailing list