[ntp:questions] ACTS: client does not accept acts synchronized server

Heiko Gerstung heiko.removethistext.gerstung at meinberg.de
Thu Apr 26 08:56:02 UTC 2007


Ok, I found it. Gosh, do you know this situation, you tell your 
customers all day long to check their restriction settings and then find 
yourself running into exactly the same config error? Thank god its 
(almost) Friday and we are approaching a long weekend ..

Sorry to have bothered you,

kind regards,
Heiko



Heiko Gerstung schrieb:
> Hi!
> 
> Despite the fact that my ACTS synchronized time server seems to be 
> working fine, my client does not accept it.
> 
> Any other parameters I have to change?
> 
> "ntpq -p" on server
> (the GPS/PPS sources are noselect and only used for measuring the 
> accuracy of the ACTS source)
> 
>      remote           refid      st t when poll reach   delay   offset 
>  jitter
> ============================================================================== 
> 
>  server          .INIT.          16 l    - 1024    0    0.000    0.000   
> 0.000
>  GENERIC(0)      .GPS.            0 l    5   64  377    0.000   47.289   
> 0.391
>  PPS(0)          .PPS.            0 l   36   64  377    0.000   47.228   
> 0.341
> *ACTS_MODEM(1)   .PTB.            0 l  127 1024  377    0.000   -4.530 
>  4.289
> 
> 
> "ntpq -p" on client
> (the server is the second association)
> 
>      remote           refid      st t when poll reach   delay   offset 
>  jitter
> ============================================================================== 
> 
> *gateway.py.mein .GPSi.           1 u    3   64  377    0.131    3.278 
>  0.042
>  rsvd-heiko-229. .INIT.          16 u   50 1024    0    0.000    0.000   
> 0.000
> 
> 
> Best Regards,
> Heiko




More information about the questions mailing list