[ntp:questions] Unable to use SUSE Linux for time synchronization.
sandypossible at gmail.com
Wed Feb 14 07:24:26 UTC 2007
On Feb 10, 1:42 am, Steve Kostecke <koste... at ntp.isc.org> wrote:
> On 2007-02-09, sandy <sandypossi... at gmail.com> wrote:
> > I have problem when using SUSE Linux as time server. When I try to use
> > linux as time server, Linux replies with LI leap indicator flags set
> > to "alarm condition (clock not synchronized)". As per RFC 2030, as
> > unicast mode is used, as LI is 3, the reply is getting rejected. My
> > Linux time server is standalone system. It is not getting time synched
> > with external source. Could this the be the reason ?
> ntpd must be synchronized to _something_, even if it's just the
> Undisciplined Local Clock, or LocalCLK, (i.e. 127.127.1.x), before it
> can serve time to others.
> The best source of time is a ref-clock or another time server which is
> (ultimately) synced to a ref-clock. You may use remote time servers
> from the NTP Pool (http://ntp.isc.org/poolorhttp://www.pool.ntp.org/)
> or select servers from the Stratum-2 list (http://ntp.isc.org/s2orhttp://www.ntp.org/s2). You should use 4, or more, remote time servers.
> You can use only 1 or 3, although that does not provide enough
> redundancy). Do not, under any circumstances, use 2.
> If your ntpd is not able to poll a real time source (either a local
> ref-clock or a remote time server) then you will have to configure the
> LocalCLK as follows:
> server 127.127.1.0
> fudge 127.127.1.0 stratum 10
> Then restart ntpd and wait ~5 to 8 minutes. Then your SNTP clients
> should accept the time from your ntpd. You should see the following
> 'ntpq -p' billboard when ntpd is synced to only the LocalCLK:
> remote refid st t when poll reach delay offset jitter
> *LOCAL(0) .LOCL. 11 l NN NN 377 0.000 0.000 0.004
> If are unable to synchronize to your ntpd, please post the following:
> * Your 'ntpq -p' billboard
> * Your /etc/ntp.conf file (without the comment lines)
> Steve Kostecke <koste... at ntp.isc.org>
> NTP Public Services Project -http://ntp.isc.org/
Thanks for the information. I am unable to use as indicated above. I
am using SUSE linux. The putput of "ntpq -p" at my setup is :
remote refid st t when poll reach delay offset
*LOCAL(0) LOCAL(0) 10 l 50 64 17 0.000
What could be wrong here ?
I get the following error when I try "ntpdate ",
# ntpdate -u 192.168.1.121
14 Feb 18:17:48 ntpdate: no server suitable for synchronization
I want to use SUSE as time server and by not synchronizing it to
external time server.
Thanks in advance for the help.
More information about the questions