[ntp:questions] Starting ISC NTP -4.2.4

Aggarwal Vivek-Q4997C Q4997C at motorola.com
Wed Feb 13 08:32:49 UTC 2008


Hi 

Thanks for the quick response. Yaa I did make install, even I copied the
default startup script too, but its not working. I will check the log
messages and check if its showing some errors

Regards
Vivek Aggarwal

-----Original Message-----
From: questions-bounces+q4997c=motorola.com at lists.ntp.org
[mailto:questions-bounces+q4997c=motorola.com at lists.ntp.org] On Behalf
Of Hal Murray
Sent: Wednesday, February 13, 2008 1:41 PM
To: questions at lists.ntp.org
Subject: Re: [ntp:questions] Starting ISC NTP -4.2.4


>Iam trying to install ISC NTP-4.2.4 on RHEL 4. But Im not able to start
>the services. 

>I firstly removed the default rpm and then compiled the latest version,
>configured the ntp.conf file, but Iam not able to start the service. I
>give the command /etc/init.d/ntpd start. # prompt comes back. 

>Can anyone guide me in figuring out and solving the problem

Did you do a make install?

Do you even have a file in /etc/init.d/ntpd?  I expect the old
one came from the rpm and it probably didn't get replaced by
anything from the ntp source package - those things are too
system specific.

Did it give any error messages?  They usually end up in
/var/log/messages unless/until you switch them to another
log file with a logfile command in your config file.

/etc/init.d/ntpd is just a shell script.  You should be able to
debug it.  (It might take a while if you haven't worked in that
area before.)  Use "echo xxx" as the printf equivalent.  "echo $foo"
will expand foo from the environment variables.

-- 
These are my opinions, not necessarily my employer's.  I hate spam.

_______________________________________________
questions mailing list
questions at lists.ntp.org
https://lists.ntp.org/mailman/listinfo/questions



More information about the questions mailing list