[ntp:questions] DCF77 Problem

Rob van der Putten rob at sput.nl
Tue Feb 24 17:56:34 UTC 2009


Hi there


Rob wrote:

> So do a "stty -a </dev/refclock-0" the next time it is messed up again.
> 
> Then you should get this output:
> 
> speed 50 baud; rows 0; columns 0; line = 0;
> intr = <undef>; quit = <undef>; erase = <undef>; kill = <undef>; eof = <undef>;
> eol = <undef>; eol2 = <undef>; swtch = <undef>; start = <undef>; stop = <undef>;
> susp = <undef>; rprnt = <undef>; werase = <undef>; lnext = <undef>;
> flush = <undef>; min = 1; time = 0;
> parenb -parodd cs8 -hupcl -cstopb cread clocal -crtscts
> -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon -ixoff
> -iuclc -ixany -imaxbel -iutf8
> -opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0
> -isig -icanon -iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop -echoprt
> -echoctl -echoke
> 
> If not, something has messed up your port.  Your task to find out what
> it is.

Assuming of course, that ntpd doesn't reset the tty to the original 
values when stopped.
Or should I do this with ntpd running?


Regards,
Rob




More information about the questions mailing list