[ntp:questions] FreeBSD 7.3, net4501, ntpd & gpsd?
oberman at es.net
Tue Oct 5 19:48:38 UTC 2010
> From: =?ISO-8859-1?Q?G=F6ran_Sandin?= <gsan.news at mailnull.com>
> Date: Tue, 05 Oct 2010 19:59:07 +0200
> Sender: questions-bounces+oberman=es.net at lists.ntp.org
> On 2010-10-05 18:48, Kevin Oberman wrote:
> >> From: =?ISO-8859-1?Q?G=F6ran_Sandin?=<gsan.news at mailnull.com>
> >> Date: Tue, 05 Oct 2010 18:15:11 +0200
> >> Sender: questions-bounces+oberman=es.net at lists.ntp.org
> >> On 2010-10-05 16:48, Hans Jørgen Jakobsen wrote:
> >>> On Sun, 3 Oct 2010 20:29:51 GMT, Goran Sandin wrote:
> >>>> When I start ntpd I get these two comments in /var/log/messages:
> >>>> refclock_newpeer: clock type 28 invalid
> >>>> configuration of 127.127.28.0 failed
> >>> Clock 28 not compiled into binary.
> >>> /hjj
> >> OK, I suspected something like that.
> >> If I check /usr/ports/net/ntp, it shows NTP 4.2.6p1.r5 (i.e. not the
> >> same as the package I use). Make showconfig does not reveal any options
> >> to include clock 28.
> >> How do I tell the port to include clock 28 (if possible)?
> > You need to build ntpd (or the whole port) with REFCLOCK and CLOCK_SHM
> > defined.
> Thanks Kevin,
> but still, if I do 'make config', I only see three options; NTPSNMPD,
> RAWDCF & SSL.
> How do I build the port with other options?
Oops! I just looked at config.h and I am incorrect. The right answer is
to uncomment the line and change 'undef' to 'define'. Sorry.
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: oberman at es.net Phone: +1 510 486-8634
Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751
More information about the questions