[ntp:questions] ntpd on AIX6.1 does not start

Dieter Geyer briefkopf at freenet.de
Wed Jan 19 14:06:32 UTC 2011


Hello

i have following problem under AIX6.1, ntpd compiles OK, but when i
start the ntpd,then this error occurs :

18 Jan 17:36:33 ntpd[6357216]: init_socket_sig: ioctl(I_SETSIG, S_INPUT)
failed: Operation not supported on socket

can anybody help ?

Thanks
Dieter

#################
some Information :

NTP 4.2.6P3 & DCF77 RAWDCF Clock on tty2

/temp/ntp-4.2.6p3 $> ls -l /dev/refclock-0
lrwxrwxrwx    1 root     system            9 04 Jan 19:58
/dev/refclock-0 -> /dev/tty2

AIX6.1 :
/temp/ntp-4.2.6p3 $> uname -a
AIX duffy-aix61 1 6 005F215D4C00

Patchlevel :
/temp/ntp-4.2.6p3 $> oslevel -s
6100-06-03-1048

/temp/ntp-4.2.6p3 $> rpm -qa | grep gcc
gcc-4.2.4-2
gcc-cpp-4.2.4-2
libgcc-4.2.4-2

content of /etc/ntp.conf
# Undisciplined Local Clock. This is a fake driver intended for backup
# and when no outside source of synchronized time is available.
# !!! server  127.127.1.0     # local clock
# !!! fudge   127.127.1.0 stratum 10

# fuer die DCF77 Clock
server 127.127.8.0 mode 12

################

ntp was compiled with these options:
./configure  --disable-ipv6 --enable-debugging  --enable-all-clocks

################

error on startup:

/temp/ntp-4.2.6p3 $> ./ntpd/ntpd -4 -n  -d -d
ntpd 4.2.6p3 at 1.2290 Sun Jan 16 21:34:03 UTC 2011 (3)
18 Jan 17:41:35 ntpd[6226166]: signal_no_reset: signal 3 had flags 48
18 Jan 17:41:35 ntpd[6226166]: signal_no_reset: signal 10 had flags 48
18 Jan 17:41:35 ntpd[6226166]: set_process_priority: Leave priority
alone: priority_done is <2>
18 Jan 17:41:35 ntpd[6226166]: proto: precision = 1.000 usec
loop_config: item 1 freq 0.000000
Finished Parsing!!
create_sockets(123)
18 Jan 17:41:35 ntpd[6226166]: ntp_io: estimated max descriptors: 2000,
initial socket boundary: 48
18 Jan 17:41:35 ntpd[6226166]: init_socket_sig: ioctl(I_SETSIG, S_INPUT)
failed: Operation not supported on socket




More information about the questions mailing list