[ntp:questions] ntp version 4.2.7p257-o
Mark C. Stephens
marks at non-stop.com.au
Tue Feb 21 11:52:19 UTC 2012
Dave, et al,
My most humble apologies, In summary I tried windows ntpd on another box and PPS works as it should.
I am now getting pps tally and GPS_NMEA(1) PPS_RELATE_PHASE in debug.
Before It worked the first box joined the GPS sentences together, not good.
So I ended up using an identical box to my freebsd ntp server and it works perfectly.
This is where I wanted to be! As they say in America, Dang!
Anyway, I will confirm by trying drives in other systems but it seems a serial port problem with HP servers.
So far I have tried
DL360 G1 - PPS relate none
DL360 G5 - GPS sentences joined together.
The boxen ntpd works fine on is a pair of old HP procurve 760wl wireless lan controllers.
These have a pc system board with an intel P4 celeron and hardisk etc. basically a rack mount PC.
As I said I will try the same model DL series but with different hardware and see if PPS works.
I do hope it's not a design problem with the HP servers.
C:\Program Files\NTP\bin>ntpq -c peer -c version -c rv -c cv
remote refid st t when poll reach delay offset jitter
oGPS_NMEA(1) .GPS. 0 l 12 16 377 0.000 0.532 0.070
+ntp .GPS. 1 u 65 64 377 1.099 0.669 2.403
+ntp.melbourne.n .ATOM. 1 u 66 64 377 42.591 5.821 19.550
-ntp.hobart.nmi. 126.96.36.199 2 u 26 64 377 54.882 -13.197 110.872
+ntp.brisbane.nm .ATOM. 1 u 1 64 377 31.432 6.201 20.932
ntpq 4.2.7p257-o Feb 17 21:01:50.18 (UTC-00:00) 2012 (1)
associd=0 status=0415 leap_none, sync_uhf_radio, 1 event, clock_sync,
version="ntpd 4.2.7p257-o Feb 17 20:58:49.54 (UTC-00:00) 2012 (1)",
processor="x86", system="Windows", leap=00, stratum=1, precision=-18,
rootdelay=0.000, rootdisp=1.180, refid=GPS,
reftime=d2ee0345.93e69a6b Tue, Feb 21 2012 22:49:25.577,
clock=d2ee0351.e9524afa Tue, Feb 21 2012 22:49:37.911, peer=10366, tc=4,
mintc=3, offset=0.532, frequency=-18.075, sys_jitter=0.070,
associd=0 status=0011 1 event, clk_no_reply,
device="NMEA GPS Clock", timecode="$GPZDA,114938,21,02,2012,+00,00",
poll=46, noreply=1, badformat=0, baddata=0, fudgetime2=-480.000,
stratum=0, refid=GPS, flags=1
> -----Original Message-----
> From: Mark C. Stephens [mailto:marks at non-stop.com.au]
> Sent: Tuesday, 21 February 2012 8:23 PM
> To: Chris Albertson
> Cc: questions at lists.ntp.org
> Subject: Re: [ntp:questions] ntp version 4.2.7p257-o
> Oh no I have a tom tom for the Car ;)
> I have everything I need in place, a couple of spare 27db bullet antennii
> already up on the eaves, outside, I can knock up PSU's or TTL convertors as
> Cables already run, I can crimp bnc, sma, tnc on the lab end as needed.
> Must have, is a GPS RX that doesn't wander halfway across town, has a
> regular PPS without jitter and outputs PPS and sentence the type 30 refclock
> can use!
> Basically an accurate receiver vs. $$$. I can't do more than 100 bucks I guess.
> That's about it, I can't afford to buy everything available ):
> It's a shame I can't use the HP GPS I have now.
> The jitter sits on 0.02 all day long but refuses to work under windows ntpd,
> wonderful under FreeBSD but no PPS workee under windows.
> Dave and I have been over, under and around everything to no avail. We
> thought to try another receiver.
> I just had a thought, try it on another windows boxen! Amazing how come I
> didn't think of that before!
> I have the same chassis and system board the freebsd is running on, I'll load
> windows on and see if that maketh any difference.
> Many thanks,
> > -----Original Message-----
> > From: Chris Albertson [mailto:albertson.chris at gmail.com]
> > Sent: Tuesday, 21 February 2012 1:06 PM
> > To: Mark C. Stephens
> > Subject: Re: [ntp:questions] ntp version 4.2.7p257-o
> > On Mon, Feb 20, 2012 at 4:54 PM, Mark C. Stephens <marks at non-
> > stop.com.au> wrote:
> > > Hi Dave,
> > >
> > >
> > > Not being a mind reader you wouldn't know I am using a HP GPS.
> > > I am still looking at ordering a Sure, but I am stuck between:
> > > A Garmin 18LV, A Sure GPS Mk I or a Sure GPS Mk II or this:
> > >
> > =f
> > > 1b73789c789ab97bd81813764de5d69
> > >
> > > Someone help me make up my mind so I can order something already!
> > Make a list of "must haves" and "like to haves" and a budget and list
> > the requirements in order. How will you physically mount the antenna
> > and route cables. What accuracy do you need? Can you solder you own
> > cables? Just list this all out.
> > If you post your list here people will be able to give informed advice
> > otherwise it is as if I were to post "what kind of car should I buy"
> > --
> > Chris Albertson
> > Redondo Beach, California
More information about the questions