[ntp:questions] Ublox binary commands via gpsctl

E-Mail Sent to this address will be added to the BlackLists Null at BlackList.Anitech-Systems.invalid
Mon Aug 19 20:15:03 UTC 2013


Anthony Stirk wrote:
> I'm trying to set a specific dynamic model (Stationary*)
>   on the ublox module on my Raspberry Pi.
>  This is achieved by sending a binary command to the module.
> I'm struggling to work out how to issue this command to
>  the module via gpsctl.
> ...
> To ascertain if the command is working I've been trying
>  to send the cold boot command which is
> \xB5 \x62 \x06 \x04 \x04 \x00 \xFF \x87 \x00 \x00 \x94 \xF5
> ...
> sudo gpsctl -t "uBlox UBX binary" -b -D 5 -x \xB5 \x62 \x06
>  \x04 \x04 \x00 \xFF \x87 \x00 \x00 \x94 \xF5

e.g. ? <http://lindi.iki.fi/lindi/gps/gpsctl2.txt>


-- 
E-Mail Sent to this address <BlackList at Anitech-Systems.com>
  will be added to the BlackLists.



More information about the questions mailing list