[ntp:questions] Using NTP to calibrate sound app

no-one at no-place.org no-one at no-place.org
Mon Jan 28 16:06:49 UTC 2013

On 28 Jan 2013 09:57:00 GMT, Rob <nomail at example.com> wrote:

>There will be the extra complication that a UMTS connection goes into
>a "sleep mode" when there is little or no traffic.  To "wake it up"
>you need to send about 4 packets/second for some time.  This is a
>very typical pattern on a UMTS connection:
>ping -i1
>PING ( 56(84) bytes of data.
>64 bytes from ( icmp_seq=1 ttl=127 time=461 ms
>64 bytes from ( icmp_seq=2 ttl=127 time=377 ms
>64 bytes from ( icmp_seq=3 ttl=127 time=390 ms
>64 bytes from ( icmp_seq=9 ttl=127 time=246 ms
>64 bytes from ( icmp_seq=10 ttl=127 time=144 ms
>64 bytes from ( icmp_seq=11 ttl=127 time=50.8 ms
>64 bytes from ( icmp_seq=12 ttl=127 time=52.2 ms
>64 bytes from ( icmp_seq=13 ttl=127 time=102 ms
>64 bytes from ( icmp_seq=14 ttl=127 time=50.4 ms
>64 bytes from ( icmp_seq=15 ttl=127 time=51.4 ms
>64 bytes from ( icmp_seq=16 ttl=127 time=52.4 ms
>64 bytes from ( icmp_seq=17 ttl=127 time=47.6 ms
>64 bytes from ( icmp_seq=18 ttl=127 time=50.1 ms
>64 bytes from ( icmp_seq=19 ttl=127 time=51.4 ms
>64 bytes from ( icmp_seq=20 ttl=127 time=47.4 ms
>As you can see, totally unsuitable for accurate time calibration.

Would I likely get better results if I advised my users to connect to
broadband wi-fi if possible and I use that instead of 3G data?

Robert Scott
Hopkins, MN

More information about the questions mailing list