[ntp:questions] ntp problem
macca.maccaferri at gmail.com
macca.maccaferri at gmail.com
Tue Jul 4 16:27:43 UTC 2017
My ntp.conf
# Use GPS/TAC2/Oncore clock M12+
server 127.127.30.0 prefer minpoll 4 maxpoll 4
fudge 127.127.30.0 refid GPS
pps /dev/oncore.pps.0 assert hardpps # PPS device
************************************
My ntp.oncore0
MODE 1
LONG 11.6448197
LAT 44.5240
HT 62.5 m
DELAY 100
ASSERT
TRAIM YES
On Tuesday, July 4, 2017 at 6:23:40 PM UTC+2, macca.ma... at gmail.com wrote:
> I have an oncore M12+ gps, I have setup a ntp server using centos 7 distribution.
> I have installed it with ntp version 4.2.8p8.
>
> All looks ok for weeks, but some days starting in april I get
> this messages on file clockstats BAD TRAIM
> and during this time the reference clock is considered unavailable,
> the error loops jump from microseconds to millisecond.
>
> Now the problem arise quite frequently, several times in a day
> I get BAD TRAIM and reference clock is ignored.
> Very seldom but few days all is ok for all 24 hours.
>
> In clockstats also I have a messages like this:
>
> 57934 83.282 127.127.30.0 Internal Error: max error msg length exceeded in clockstats file (128)
> 57934 83.282 127.127.30.0 Start of message was
> 57934 83.282 127.127.30.0 3707769683.000000485 2017 181 0 1 23 23 rstat 8400 dop 0.0 nsat 10,10 traim 1,0,0 sigma 230 neg-sawtooth -14 sat 888814 sat 8888
> 88888700
>
>
> please note that at the end of last line sat keyword is doubled and firts time is not complete.
>
> During this internal error the loops error do not change, the main problem is only when BAD TRAIM is present.
>
>
>
> Any idea what I should check?
>
> Best regard
> Andrea
More information about the questions
mailing list