[ntp:questions] NTP under AIX?

Greg Moeller skywise at gmail.com
Tue May 16 21:24:07 UTC 2017


On Tuesday, May 16, 2017 at 2:07:01 PM UTC-5, Terje Mathisen wrote:
> Greg Moeller wrote:
> > On Tuesday, May 16, 2017 at 10:37:55 AM UTC-5, Greg Moeller wrote:
> >> Has anyone come across the advisability of running an enterprise-wide NTP server under an AIX LPAR?
> >> We're currently running NTP on old Intel hardware and the company policy is to refresh hardware on a regular basis.
> >> It seems a waste to buy several new servers if we could just put the NTP service on an AIX LPAR.
> >
> > I'm at a large company, serving NTP to over >1000 systems.
> > Policy is that we can't have old hardware, so they will spend several thousand $$ on servers to run a single process.  (we're an IBM/Lenovo based shop)
> >
> > Technically, yes, this is a virtual machine, but this is on 250K$+ hardware, not something like ESXi or Xen.
> > (and CPU/RAM/hardware can be dedicated to the LPAR if needed)
> > These boxes are meant for heavy lifting, the same type of frames power AIX, iSeries, IBM mainframe, and Watson.
> >
> > Is there a way to test?  It seems like I'm heading into the unknown here.  :)
> >
> There is indeed a way to test: "Just do it!"
> 
> I worked for many years in a similar enviroment (large multi-national 
> corporation with factories/offices in 100+ countries), our LPAR based 
> AIX machines were very stable.
> 
> Terje
> 
> PS. I did use to run our ultimate NTP reference clock on a hand-soldered 
> GPS board hanging on the side of a FreeBSD (v 4.x probably, i.e. a long 
> time ago) box under my desk.
> 
> A number of years later I finally got the money to do a proper job, 
> that's when I setup 3-4 geo-distributed GPS-based Stratum 1 clocks (from 
> 3 different vendors), with a second layer of 6+ Stratum 2 machines.
> 
> The S2 machines used all of the S1 servers plus a set of vetted external 
> S1 and S2 reference servers. All other internal machines used all the S2 
> servers as their configured sources.
> 
> -- 
> - <Terje.Mathisen at tmsw.no>
> "almost all programming can be viewed as an exercise in caching"

Ok, I'm good with 'just do it'!  :)
So, as a test.  If I setup 2 servers(Physical x86 and AIX LPAR) with the same external sources, how can I test them against one another?  I've dabbled in NTP for years but never delved far into the deeper numbers.



More information about the questions mailing list