# Prohibit general access to this service. #restrict default ignore #commented out #restrict default kod nomodify notrap nopeer #commented out # Permit all access over the loopback interface. This could # be tightened as well, but to do so would effect some of # the administrative functions. restrict 127.0.0.1 # -- CLIENT NETWORK ------- # Permit systems on this network to synchronize with this # time service. Do not permit those systems to modify the # configuration of this service. Also, do not use those # systems as peers for synchronization. restrict 192.168.0.0 mask 255.255.255.0 nomodify #SEE BELOW # Have changed the above address to match my network address # --- OUR TIMESERVERS ----- # or remove the default restrict line # Permit time synchronization with our time source, but do not # permit the source to query or modify the service on this system. # restrict mytrustedtimeserverip mask 255.255.255.255 nomodify notrap noquery # server mytrustedtimeserverip server ntp.obspm.fr server ntp.kamino.fr server ntp2.belbone.be server via.ecp.fr # --- NTP MULTICASTCLIENT --- #multicastclient # listen on default 224.0.1.1 # restrict 224.0.1.1 mask 255.255.255.255 notrust nomodify notrap restrict 192.168.0.0 mask 255.255.255.0 nomodify notrap #SEE BELOW # Not sure if the above line should be uncommented, as the CLIENT NETWORK line is also # --- GENERAL CONFIGURATION --- # # Undisciplined Local Clock. This is a fake driver intended for backup # and when no outside source of synchronized time is available. The # default stratum is usually 3, but in this case we elect to use stratum # 0. Since the server line does not have the prefer keyword, this driver # is never used for synchronization, unless no other other # synchronization source is available. In case the local host is # controlled by some external source, such as an external oscillator or # another protocol, the prefer keyword would cause the local host to # disregard all other synchronization sources, unless the kernel # modifications are in use and declare an unsynchronized condition. # server 127.127.1.0 # local clock fudge 127.127.1.0 stratum 10 # # Drift file. Put this in a directory which the daemon can write to. # No symbolic links allowed, either, since the daemon updates the file # by creating a temporary in the same directory and then rename()'ing # it to the file. # driftfile /var/lib/ntp/drift #broadcastdelay 0.008 #commented out # # Authentication delay. If you use, or plan to use someday, the # authentication facility you should make the programs in the auth_stuff # directory and figure out what this number should be on your machine. # #authenticate yes #commented out # # Keys file. If you want to diddle your server at run time, make a # keys file (mode 600 for sure) and define the key number to be # used for making requests. # # PLEASE DO NOT USE THE DEFAULT VALUES HERE. Pick your own, or remote # systems might be able to reset your clock at will. Note also that # ntpd is started with a -A flag, disabling authentication, that # will have to be removed as well. # #keys /etc/ntp/keys #commented out