[ntp:questions] Re: FreeBSD 5.3, Oncore UT+ and PPS
Richard B. Gilbert
rgilbert88 at comcast.net
Tue Dec 14 15:53:37 UTC 2004
Dennis Spexet wrote:
>Damn, that's what I was afraid of. ntptime on my machine shows:
>
> status 0x2001 (PLL,NANO),
>
>Back to the drawing board I guess. The same hardware was used for ntpd
>4.0.99 on Linux, and pps worked there...so I know that it can work. The
>only problem is how to correctly configure FreeBSD and ntpd 4.2.0.
>
>-Dennis Spexet, spexet at visi.com
>
>"Bjorn Gabrielsson" <bg at lysator.liu.se> wrote in message
>news:m3acsh5l7f.fsf at lysator.liu.se...
>
>
>>"Dennis Spexet" <spexet at visi.com> writes:
>>
>>
>>
>>>is working (at a basic level at least). I'm wondering though if PPS is
>>>working? Is there a quick way in 4.2.0 to check that the PPS signal is
>>>being read?
>>>
>>>
>>On linux ntptime should contain a line like this
>>
>> status 0x2107 (PLL,PPSFREQ,PPSTIME,PPSSIGNAL,NANO),
>>
>>
>
>
>
>
Did you create a soft link from /dev/oncore.0 to the serial port you
connected the Oncore to?
More information about the questions
mailing list