[ntp:questions] Meinberg DCF77 C51 with Linux 2.6

Rune Magnussen rum at gratismail.dk
Sat Feb 10 22:38:32 UTC 2007


Den Sat, 10 Feb 2007 21:57:27 +0000. skrev Maurice Janssen:

> On Sat, 10 Feb 2007 20:56:24 +0100, Rune Magnussen wrote:
>>Ok. I will try with an other cable. Perhaps I was just impatient waiting
>>for a good signal. The PARSE-driver with mode 2 expects the serial line to
>>use 7E2 according to
>>http://www.eecis.udel.edu/~mills/ntp/html/drivers/driver8.html
> 
> In that case, you're right.  I was just wondering, maybe you used a
> terminal program to look at the raw data coming from the C51.
> Does it work now?

Still waiting for a stable signal. I am using a printer cable with 9
(female) / 25 (male) connectors. Is that the kind of cable you were
thinking of?

i started out using an ordinay modem cable but since it did not work at
first I started this journey into the RS-232 jungle.

/Rune




More information about the questions mailing list