[ntp:questions] outout of ntpq -p
Atul Gupta
atul14.kumar at gmail.com
Mon May 21 19:31:26 UTC 2012
Hi,
I am running my ntpd in ipv6 multicast mode, below is my conf file :-
multicastclient ff05::101
disable auth
driftfile /var/log/ntp/drift
logfile /var/log/ntp/ntp.log
I am syncing with ntp server whose ip is :- 2001:5b0:3eff:fffa::310
, which i can verify through my ntp logs ( below ) :-
receive: at 8364 ff05::101<-2001:5b0:3eff:fffa::310 mode 5 len 48
clock_filter: n 8 off -0.015410 del 0.000000 dsp 0.000960 jit 0.006433
select: combine offset -0.015410374 jitter 0.006432542
clock_update: at 8364 sample 8364 associd 16381
local_clock: offset -0.015410000 jit 0.009358219 freq 8.668 stab 0.061 poll 6
receive: at 8430 ff05::101<-2001:5b0:3eff:fffa::310 mode 5 len 48
clock_filter: n 8 off -0.020993 del 0.000000 dsp 0.000959 jit 0.006987
select: combine offset -0.020992699 jitter 0.006987410
clock_update: at 8430 sample 8430 associd 16381
local_clock: offset -0.020993000 jit 0.008973546 freq 8.585 stab 0.064 poll 6
But, when i run ntpq program to check the ntp status, i get following out out :-
# ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
*2001:5b0:3eff:f LOCAL(0) 11 m 17 64 376 0.000 8.151 25.053
It seems that ipv6 address doesn't accommodate completely in this,
that's why i see incomplete ipv6 address ( 2001:5b0:3eff:f ), is there
a way to fix this issue.
Please help!!!
Regards,
Atul.
More information about the questions
mailing list