[ntp:questions] Using Trimble TSIP under Linux

A C agcarver+ntp at acarver.net
Mon Oct 29 03:32:27 UTC 2012


On 10/28/2012 20:15, David Taylor wrote:
> On 28/10/2012 20:50, A C wrote:
> []
>> If your PPS signal is on /dev/pps0 as you describe, add the ATOM driver
>> (number 22) in addition to your SHM (gpsd) driver and it will be fine:
>>
>> This is exactly how I have my own server running (but not on an R-pi).
>> PPS comes in via one port, gpsd SHM comes in from another port and two
>> drivers (22 and 28) take care of gluing them together.
>>
> []
>> server 127.127.22.0  minpoll 4 maxpoll 4
>
>   A C thanks for your reply.  I added the 127.127.22.0 server and
> removed the 127.127.28.1 server, but I don't see any line relating to
> the ATOM driver in the ntpq -p output.  Should I?  Perhaps the "*" will
> simply turn to a "o" after enough time?  Makes me wonder whether my NTP
> has been compiled with ATOM support - I'm using the one which comes with
> the current Linux for the Raspberry Pi.

Check the main ntpd log for error messages.



More information about the questions mailing list