[ntp:questions] Trying to make NTP daemon as one of the Sync source

akash saxena saxenaakash90 at gmail.com
Tue May 30 10:51:14 UTC 2017


*Hi all, *
*I am trying to implement a system where NTP daemon will be a Sync source
like others (GNSS/PTP/NL). *
*These all sync sources (GNSS/PTP/NL) provide a CLOCK REPORT based on their
accuracy. *
*Which consist *

   - *TimeError, *
   - *FrequencyError, *
   - *Time Uncertainty and *
   - *Frequency Uncertainty.*

*Can i get these four parameters in ntpq -pcrl output so that i can
implement NTPD as a sync source. presently i am getting the ntpq -pcrl
output like below.*



*# ntpq -pcrl     remote           refid      st t when poll reach   delay
  offset
 jitter==============================================================================
130.107.154.104
.STEP.          16 u    - 1024    0    0.000    0.000
0.000*129.107.154.104 169.254.169.254  3 u    1   64  377  280.966   52.995
 43.666associd=0 status=0618 leap_none, sync_ntp, 1 event,
no_sys_peer,version="ntpd 4.2.8p5 at 1.3265-o Thu May 25 19:52:00 UTC 2017
(1)",processor="armv7l", system="Linux/3.10.49-perf", leap=00,
stratum=4,precision=-20, rootdelay=282.690, rootdisp=80.613,
refid=104.154.107.129,reftime=dcd7cb67.7569a73c  Tue, May 30 2017
10:43:51.458,clock=dcd7ccc7.1f2fb0c4  Tue, May 30 2017 10:49:43.121,
peer=62203, tc=6,mintc=3, offset=52.994796, frequency=6.065,
sys_jitter=0.000000,clk_jitter=17.546, clk_wander=6.134Please help in
finding these parameter or how can i calculate the above by using the ntpq
-pcrl output.Thanks,Akash Saxena*


More information about the questions mailing list